Source: The Bureau of Labor Statistics

Significant points
Workers are highly susceptible to injury; those in meatpacking plants had among the highest incidences of injury and illness of all workers.

Length of training ranges from a few days for some cutters to 1 or 2 years for highly skilled butchers.

Job growth will be concentrated among lower skilled meat, poultry, and fish cutters, as more meat cutting and processing shifts from retail stores to food processing plants.

Nature of the Work
Working Conditions
Employment
Training, Other Qualifications, and Advancement
Job Outlook
Earnings
Related Occupations
Sources of Additional Information

Working Conditions
Working conditions vary by type and size of establishment. In meatpacking plants and large retail food establishments, butchers and meatcutters work in large meatcutting rooms equipped with power machines and conveyors. In small retail markets, the butcher or fish cleaner may work in a space behind the meat counter. To avoid viral and bacterial infections, work areas must be clean and sanitary.

Meatpacking plants had one of the highest incidences of work-related injury and illness of any industry in 1995. Butchers and meat, poultry, and fish cutters often work in cold, damp rooms, which are refrigerated to prevent meat from spoiling and are damp because meat cutting generates large amounts of blood, condensation, and fat. These cool damp floors increase the likelihood of slips and falls. In addition, the low temperature, combined with the need to stand for long periods of time and perform physical tasks, makes the work tiring. As a result, butchers and meat, poultry, and fish cutters are more susceptible to injury than most other workers. Cuts, and even amputations, occur when knives, cleavers, and power tools are used improperly. Repetitive slicing and lifting often lead to cumulative trauma injuries, such as carpal tunnel syndrome. To reduce the incidence of cumulative trauma disorders, some employers have reduced work loads, redesigned jobs and tools, and increased awareness of early warning signs. Nevertheless, workers in this occupation still face serious threat of disabling injuries.

Employment
Butchers and meat, poultry, and fish cutters held about 369,000 jobs in 1996. Nearly 60 percent worked in meatpacking or poultry and fish processing plants, while most others in this occupation were employed at the retail level in grocery stores, meat and fish markets, restaurants, or hotels. The majority of the 217,000 skilled butchers and meatcutters worked in retail grocery stores, while nearly all meat, poultry, and fish cutters worked in meatpacking or poultry and fish processing plants. Highly skilled butchers and meatcutters are employed in almost every city and town in the Nation, while lower skilled meat, poultry, and fish cutter jobs are concentrated in communities with food processing plants.

Training, Other Qualifications, and Advancement
Most butchers and meat, poultry, and fish cutters acquire their skills on the job through formal and informal training programs. The length of training varies significantly in this occupation, with simple cutting operations requiring a few days to learn, for example, while more complex tasks, like eviscerating, generally require about a month to learn. The training period for a highly skilled butcher at the retail level may be a year or two.

Generally, on-the-job trainees begin by doing less difficult jobs, such as simple cuts or removing bones. Under the guidance of experienced workers, trainees learn the proper use of tools and equipment and how to prepare various cuts of meat. After demonstrating skill with various meatcutting tools, they learn to divide carcasses into wholesale cuts and wholesale cuts into retail and individual portions. Trainees may also learn to roll and tie roasts, prepare sausage, and cure meat. Those employed in retail food establishments often are taught operations such as inventory control, meat buying, and record keeping. In addition, growing concern about the safety of meats has led employers to offer extensive training in food safety to employees.

Skills important in meat, poultry, and fish cutting are manual dexterity, good depth perception, color discrimination, and good hand-eye coordination. Physical strength is often needed to lift and move heavy pieces of meat. Butchers and fish cleaners who wait on customers should have a pleasant personality, a neat appearance, and the ability to communicate clearly. In some States, a health certificate is required for employment.

Butchers and meat, poultry, and fish cutters in retail or wholesale establishments may progress to supervisory jobs, such as meat or seafood department managers in supermarkets. A few of these workers become meat or seafood buyers for wholesalers or supermarket chains. Some open their own meat or fish markets. In processing plants, meat, poultry, and fish cutters may advance to supervisory positions or become team leaders.

Job Outlook
Overall employment of butchers and meat, poultry, and fish cutters is expected to grow more slowly than the average for all occupations through the year 2006. Job growth will be concentrated among lower skilled meat, poultry, and fish cutters, as more meat cutting and processing shifts from retail stores to food processing plants. Nevertheless, job opportunities should be plentiful at all levels of the occupation due to the need to replace experienced workers who transfer to other occupations or leave the labor force.

As the Nation's population grows, the demand for meat, poultry, and seafood should continue to increase. Successful marketing by the poultry industry is likely to increase demand for rotisserie chicken and ready-to-heat products. Similarly, the development of lower-fat and ready-to-heat products promises to stimulate the consumption of red meat. Although per capita consumption of fish and other seafood has been constant over the previous decade, population growth will push consumption to record levels in coming years.

Employment growth of lower skilled meat, poultry, and fish cutters - who work primarily in meatpacking, poultry, and fish processing plants—is expected to increase faster than the average for all occupations in coming years. Although much of the production of poultry and fabricated poultry products is performed by machines, the growing popularity of labor-intensive, ready-to-heat goods promises to spur demand for poultry workers. Meat and fish cutters also will be in demand, as the task of preparing ready-to-heat meat and fish goods slowly shifts from retail stores to processing plants. Although the supply of edible ocean fish is limited, advances in fish farming, or "aquaculture," should help meet the growing demand for fish and produce ample opportunities for fish cutters.

Employment of more highly skilled butchers and meatcutters, who work primarily in retail stores, is expected to gradually decline. New automation and the consolidation of the meatpacking and poultry processing industries are enabling employers to transfer employment from higher-paid butchers to lower-wage meatcutters in meatpacking plants. At present, most red meat arrives at grocery stores partially cut up, but a growing share of meat is being delivered pre-packaged with additional fat removed to wholesalers and retailers. This trend is resulting in less work for retail butchers and a declining demand for their employment.



Earnings
Butchers and meatcutters had median weekly earnings of $370 in 1996. The middle 50 percent earned between $280 and $520 a week. The highest paid 10 percent earned more than $740 a week. Meatcutters employed by retail grocery stores are generally among the higher-paid workers in this occupation.

Butchers and meat and fish cutters generally received typical benefits, including pension plans for those who were union members or employed by grocery stores. However, poultry workers rarely earned substantial benefits.

Many butchers and meat, poultry, and fish cutters are members of the United Food and Commercial Workers International Union. In 1996, nearly a third of all butchers and meatcutters were union members or covered by a union contract.

Related Occupations
Butchers and meat, poultry, and fish cutters must be skilled at both hand and machine work and must have some knowledge of processes and techniques involved in handling and preparing food. Other occupations in food preparation that require similar skills and knowledge include bakers, chefs and cooks, and food preparation workers.

Sources of Additional Information
Information about work opportunities can be obtained from local employers or local offices of the State employment service. For information on training and other aspects of this trade, contact:
United Food and Commercial Workers International Union, 1775 K St. NW., Washington, DC 20006.

Nature of the Work
Butchers and meat, poultry, and fish cutters are employed at different stages in the process that converts animal carcasses into manageable pieces of meat suitable for sale to consumers. Meat, poultry, and fish cutters generally work in meatpacking or fish and poultry processing plants, while butchers are usually employed at the retail level. As a result of this distinction, the nature of these jobs varies significantly.

In meatpacking plants, meatcutters slaughter cattle, hogs, goats, and sheep and cut the carcasses into large wholesale cuts, such as rounds, loins, ribs, and chucks to facilitate the handling, distribution, and marketing of meat. In some of these plants, meatcutters also further process these primal parts into cuts that are ready for retail use. These workers also produce hamburger meat and meat trimmings, which are used to prepare sausages, luncheon meats, and other fabricated meat products. Meatcutters usually work on assembly lines, with each individual responsible for only a few of the many cuts needed to process a carcass. Depending on the type of cut, they use knives, cleavers, meat saws, bandsaws, or other equipment.

In grocery stores, wholesale establishments that supply meat to restaurants, and institutional food service facilities, butchers separate wholesale cuts of meat into retail cuts or individual size servings. Additionally, they cut meat into steaks and chops, shape and tie roasts, and grind beef for sale as chopped meat. Boneless cuts are prepared using knives, slicers, or power cutters, while bandsaws are required to carve bone-in pieces. Butchers in retail food stores may also weigh, wrap, and label the cuts of meat, arrange them in refrigerated cases for display, and prepare special cuts of meat to fill unique orders.

Poultry cutters slaughter and cut up chickens, turkeys, and other types of poultry. The poultry processing industry is becoming increasingly automated, but many jobs such as trimming, packing, and deboning are still done manually. As in the meatpacking industry, most poultry cutters perform routine cuts on poultry as it moves along production lines.

Unlike the occupations listed above, fish cutters, also called fish cleaners, are likely to be employed in both manufacturing and retail establishments. These workers primarily cut, scale, and dress fish by removing the head, scales, and other inedible portions and cutting the fish into steaks or boneless fillets. In markets, they may also wait on customers and clean fish to order.

Retail meat, poultry, and fish cutters also prepare ready-to-heat foods. This often entails filleting meat or fish or cutting it into bite-sized pieces, preparing and adding vegetables, or applying sauces or breading.